We are always on the lookout for good guns, it does not matter to us if they are £200 or £1600, a good gun, is a good gun. These are made in the same factories as the famous E&Ls. We have fitted these rifles with Guarder SP90 springs that provide a consistent fps of 330 on a 0.20g bb (guarder). We simply cannot reccomend these rifles highly enough and we would argue that a similar quality rifle from another brand would set you back easily £400. This rifle also comes with 1 high cap and 1 Variable mid cap magazine. The spring can be changed in seconds via a Quick Change Spring System.
This model features M-Lok Rail System, M4 Style Stock tube with retracable stock, railed top cover, enhanced magazine well, MBUS style sights, Rear Sling Loop, Magpul Style Pistol Grip, Enhanced Safety Lever, All Steel Receiver, Rear Sling Point, Railed Gas Tube, AK Side Scope Bracket, Quick Release Spring, Electronic Trigger Switch, Aluminium Nozzle, 380mm Long 6.02mm Inner Barrel, 9mm Bearings / Bushings and adjustable Metal Hop Unit. The total length of this rifle is 89cm Stock Retracted 98cm Stock extended.
It is noteworthy that, as in the original the receiver, receiver cover, the safety selector and the trigger guard together with the latch of the magazine have been cold pressed from steel sheet.
Following the original, the whole front and rear bases like the muzzlebrake and the bolt carrier are made of steel also.
The gearbox of this rifle has a quick spring change system and the spring guide, as well as the piston head and 9mm steel bearings. The strong and durable Polymer piston is equipped with steel teeth that work with high-quality gears. Gears are mounted on slide bearings to be able to cope with the highest loads. Only the motor rack is mounted on ball bearings to ensure that it is free to spin at high speeds.
Inside we will find electric trigger "Micro Switch " that is connected to the low-resistance wiring, preparing the replica for cooperation with Li-Po batteries. The use of an electric trigger eliminates the problem of burned out contacts and improves the response to the trigger.
The gearbox's finished with aluminium, sealed nozzle. It works with a metal hop-up chamber in which a hardened 6.02mm precision steel barrel is mounted. The gearbox has been equipped with a spring tension release that has been placed next to the trigger. After the use of the replica, we can release the spring. The spring loaded lever will push the anti reversal latch to release the spring tension and makes it perfect for keeping the gearbox in top shape over time.
Our recommend upgrade package should you wish to add this for this weapon includes the following; (Parts Used will vary according to availability, only premium parts are used any financial difference will be refunded, any increase in costs will be absorbed by us).
Note: HTML is not translated!
Rating: Bad Good