Specna Arms SA-H11 ONE™ AEG (Black)

Specna Arms SA-H11 ONE™ AEG (Black)

SA-H11 ONE carbine replica by Specna Arms is made largely of a uniform zinc and aluminium alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). Both the stock storing the battery and the pistol grip were made from polymer. The receiver of the replica and RIS handguard have undergone the process of anodizing, which guarantees high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. The receiver bears manufacturer markings.

The replica’s parts are very well aligned - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for an almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered. 

The replica features a quick spring change system, so-called Enter & Convert™. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring change lasts literally seconds.

The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and much freedom. Enter & Convert™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

A reinforced at the cylinder level gearbox contains a steel spring guide that is an element of Enter & Convert™ system and mounted on 8 mm ball bearings and washers steel gears. The system is secured with four anti-reversal latches. Also, a type 2 cylinder and a steel circuit-breaker. At stock, the replica features a precise, rotary, polymer Hop-Up chamber that allows for very precise and stable BB spin adjustment.

The replica is equipped with a top RIS 20 mm rail, a modular handguard, and an adjustable stock. The top RIS rail features metal flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s length to the body type and preferences of the User. The flash hider is based on a 14 mm left-handed thread, which allows the attachment of a silencer in its place. 

The replica features double-sided manipulators: fire mode selector, magazine release button and mock Bolt-Catch release button. 

Upgrade Package Contents

Tier 1 (Increases Range and Accuracy) - Prometheus Air seal chamber Hop-up Bucking Soft Type, Prometheus Flat Tensioner, ZCI High Precision 6.02mm Stainless Steel Inner Barrel, Hop Installation Labour Included. - £100.00

Tier 1 + Mosfet Installation Labour (Increases Range, Accuracy, ROF & Trigger Response) - Prometheus Air seal chamber Hop-up Bucking Soft Type, Prometheus Flat Tensioner, ZCI High Precision 6.02mm Stainless Steel Inner Barrel, Gearbox Clean, Reshim, Re-Grease with LT2. Hop Installation and Mosfet Fitting Labour Included. Please remember to Select Which Mosfet you would like - £160.00

Tier 2 (Increases Range, Accuracy, ROF, Trigger Response and Reliability) - Prometheus Air seal chamber Hop-up Bucking Soft Type, Prometheus Flat Tensioner, ZCI High Precision 6.02mm Stainless Steel Inner Barrel, SHS AEG Spring, SHS Aluminium Air Seal Nozzle, SHS 14.5 Full Steel Teeth Piston, SHS High Torque Motor, Nylon AOE Spacer, SHS Double O-Ring Aluminium AEG Cylinder Head, SHS Gearbox Shim Set, SHS Polymer Vented Piston Head, SHS Stainless Steel Airsoft Gearbox Bearings, SHS High Speed Gear set (13:1), Labour Included. If you wish to add a Mosfet with this Tier Simply Select Which Mosfet you would like - £375.00

Tier 3 (Increases Range, Accuracy, ROF, Trigger Response and Reliability using Best Available Parts) - SHS AEG Spring, CYMA 14.5 Steel Teeth Piston, Nylon AOE Spacer, SHS Aluminium O-Ring Nozzle, Gate EON Speed CNC Piston Head, ZCI 6.02mm Steel Inner Barrel, GATE EON CNC Cylinder Head, SHS Gearbox Shim Set, Maple Leaf Omega Nub, SHS High Speed Gear Set (12:1) (short Stroked), EZO Japanese Premium Stainless Steel Bearings, Action Army R45000 Motor (High Speed), Maple Leaf MR. Hop-Up Bucking, FPS TSA Hardened Stainless Steel Cylinder, Labour Included. If you wish to add a Mosfet with this Tier Simply Select Which Mosfet you would like - £440.00

Get the most out of your AEG and Shop with Us! Please be aware that builds will take up to 4 weeks to complete. The Tech handling your build will call you to discuss the work prior to completion. If you have any special requests regarding your build, including special fps requirements, please leave them in the comments box on checkout. Unless otherwise requested all fully automatic AEGs to UK customers will be produced to fire between 328fps and 350fps to make them site legal.

Features

• Full Metal Rifle 
• 20mm Rail System 
• QD Sling Point 
• Quick Change Spring 
• Black Colour 
• A5 Style Design 
• Adjustable Stock 
• Flip Up Front & Rear Sights
• 14mm CCW Muzzle 
• 416 Style Pistol Grip 
• 300rnd High Cap Magazine 
• SA Markings 
• Excellent Fit & Finish 
• Incredibly Realistic Replica