SA-H01 ONE™ Assault Rifle AEG (Black)

SA-H01 ONE™ Assault Rifle AEG (Black)

SA-H01 assault rifle replica by Specna Arms is made largely from a uniform zinc and aluminium alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). Both the stock pad and the pistol grip were made from polymer. The receiver of the replica and RIS handguard have undergone the process of anodizing, which guarantees high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the same process prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. The receiver bears manufacturer markings.

The replica features a quick spring release system, so-called Enter & Convert™. Due to that system it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring change lasts literally seconds.

The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the user a varied set of possibilities and much freedom. Enter & Convert™ system allows with minimal amount of time change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between effectiveness of fire and safety for the user himself as well as other participants.

Upgrade Package Contents

Tier 1 (Increases Range and Accuracy) - Prometheus Air seal chamber Hop-up Bucking Soft Type, Prometheus Flat Tensioner, ZCI High Precision 6.02mm Stainless Steel Inner Barrel, Hop Installation Labour Included. - £100.00

Tier 1 + Mosfet Installation Labour (Increases Range, Accuracy, ROF & Trigger Response) - Prometheus Air seal chamber Hop-up Bucking Soft Type, Prometheus Flat Tensioner, ZCI High Precision 6.02mm Stainless Steel Inner Barrel, Gearbox Clean, Reshim, Re-Grease with LT2. Hop Installation and Mosfet Fitting Labour Included. Please remember to Select Which Mosfet you would like - £160.00

Tier 2 (Increases Range, Accuracy, ROF, Trigger Response and Reliability) - Prometheus Air seal chamber Hop-up Bucking Soft Type, Prometheus Flat Tensioner, ZCI High Precision 6.02mm Stainless Steel Inner Barrel, SHS AEG Spring, SHS Aluminium Air Seal Nozzle, SHS 14.5 Full Steel Teeth Piston, SHS High Torque Motor, Nylon AOE Spacer, SHS Double O-Ring Aluminium AEG Cylinder Head, SHS Gearbox Shim Set, SHS Polymer Vented Piston Head, SHS Stainless Steel Airsoft Gearbox Bearings, SHS High Speed Gear set (13:1), Labour Included. If you wish to add a Mosfet with this Tier Simply Select Which Mosfet you would like - £375.00

Tier 3 (Increases Range, Accuracy, ROF, Trigger Response and Reliability using Best Available Parts) - SHS AEG Spring, CYMA 14.5 Steel Teeth Piston, Nylon AOE Spacer, SHS Aluminium O-Ring Nozzle, Gate EON Speed CNC Piston Head, ZCI 6.02mm Steel Inner Barrel, GATE EON CNC Cylinder Head, SHS Gearbox Shim Set, Maple Leaf Omega Nub, SHS High Speed Gear Set (12:1) (short Stroked), EZO Japanese Premium Stainless Steel Bearings, Action Army R45000 Motor (High Speed), Maple Leaf MR. Hop-Up Bucking, FPS TSA Hardened Stainless Steel Cylinder, Labour Included. If you wish to add a Mosfet with this Tier Simply Select Which Mosfet you would like - £440.00

Get the most out of your AEG and Shop with Us! Please be aware that builds will take up to 4 weeks to complete. The Tech handling your build will call you to discuss the work prior to completion. If you have any special requests regarding your build, including special fps requirements, please leave them in the comments box on checkout. Unless otherwise requested all fully automatic AEGs to UK customers will be produced to fire between 328fps and 350fps to make them site legal. 

Complete Cerakote Finish

Cerakote is an incredibly hard wearing Ceramic paint coating that is baked on for unrivalled strength and durability. Cerakote increases the value of your replica, personalises it and improves service life.

Cerakote is available in a wide range of colours which can be found here under the H-Series Tab https://bit.ly/2Xk0pBd

Block Colours – 1 Colour Per Item, Please email us which parts you would like which colour, for example, upper receiver (Black), lower receiver (Dark Earth), Stock (Black), Pistol Grip (Dark Earth), Barrel (Black) etc.

Please allow 14 working days or more for your items to arrive when selecting Cerakote, naturally more complex patterns will take longer. Should you wish to supply further details or images of what you want email info@davescustomairsoft.co.uk wherever possible we will try to accommodate your request.

The gearbox which is reinforced on the height of the cylinder’s head hides a steel main spring guide which is the element of the Enter & Convert™ system and also 8mm ball bearings and steel thread-wheels which are placed on spacers. The system is secured with the use of four anti-reversals. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.

The replica is equipped with a 22mm top RIS rail, RIS handguard and an adjustable stock. The top RIS rail features metal flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad it is possible to adapt the replica’s length to the body type and preferences of the user. Standard flash hider is based on 14 mm left-hand thread, which allows the attachment of a silencer in its place. 
In order to enhance the realism of the game, the replica also features an operational bolt-catch mechanism.

The 01 version features a foldable stock mounted on slides, which significantly reduces the length of the replica making it an ideal tool for CQB combat. This, however, forces the movement of the battery included in the set into a mock AN/PEQ sight casing in the front of the replica.

The replica comes with a steel, 300 BB, Hi-Cap magazine. 

The set includes: