ARCTURUS - AK-74 Carbine (AT-AK01)

We are always on the lookout for good guns, it does not matter to us if they are £200 or £1600, a good gun, is a good gun. These AKs are made in the same factories as the famous E&L rifles. These ARCTURAS rifles have completely redesigned internals, with a brand new Gearbox and Hop Design. We have fitted these rifles with Guarder SP90 springs that provide a consistent fps of 330 on a 0.20g bb (guarder). We simply cannot reccomend these rifles highly enough and we would argue that a similar quality rifle from another brand would set you back easily £400. This rifle also comes with 1 high cap and 1 Variable mid cap magazine. The spring can be changed in seconds via a Quick Change Spring System.

This model features M-Lok Rail System, M4 Stock with CTR (no wobble) Magpul Style Pistol Grip, Enhanced Safety Lever, All Steel Receiver, Rear Sling Point, Railed Gas Tube, AK Side Scope Bracket, Quick Release Spring, Electronic Trigger Switch, Aluminium Nozzle, 340mm Long 6.02mm Inner Barrel, 9mm Bearings / Bushings and adjustable Metal Hop Unit. The total length of this rifle is 800mm (Stock Closed) 880mm (Stock Extended).

It is noteworthy that, as in the original the receiver, receiver cover, the safety selector and the trigger guard together with the latch of the magazine have been cold pressed from steel sheet.
Following the original, the whole front and rear bases like the muzzlebrake and the bolt carrier are made of steel also.

The gearbox of this rifle has a quick spring change system and the spring guide, as well as the piston head and 9mm steel bearings. The strong and durable Polymer piston is equipped with steel teeth that work with high-quality gears. Gears are mounted on slide bearings to be able to cope with the highest loads. Only the motor rack is mounted on ball bearings to ensure that it is free to spin at high speeds.

Inside we will find electric trigger "Micro Switch " that is connected to the low-resistance wiring, preparing the replica for cooperation with Li-Po batteries. The use of an electric trigger eliminates the problem of burned out contacts and improves the response to the trigger.

The gearbox's finished with aluminium, sealed nozzle. It works with a metal hop-up chamber in which a hardened 6.02mm precision steel barrel is mounted. The gearbox has been equipped with a spring tension release that has been placed next to the trigger. After the use of the replica, we can release the spring. The spring loaded lever will push the anti reversal latch to release the spring tension and makes it perfect for keeping the gearbox in top shape over time.

Upgrade Package Contents

Our recommended upgrade packages should you wish to add these for this weapon includes the following; (Parts Used will vary according to availability, only premium parts are used, any financial difference will be refunded, any increase in costs will be absorbed by us).

Tier 1 - Prometheus Air seal chamber Hop-up Bucking Soft Type, Prometheus Flat Tensioner, ZCI High Precision 6.02mm Stainless Steel Inner Barrel, Labour. - £85.00

Tier 2 - Prometheus Air seal chamber Hop-up Bucking Soft Type, Prometheus Flat Tensioner, ZCI High Precision 6.02mm Stainless Steel Inner Barrel, Guarder AEG Spring, SHS Aluminium Air Seal Nozzle, SHS 14.5 Full Steel Teeth Piston, Airlab Sorbothane Pad, SHS High Torque Motor, SHS Double O-Ring Aluminium AEG Cylinder Head, SHS Gearbox Shim Set, SHS Polymer Vented Piston Head, SHS Stainless Steel Airsoft Gearbox Bearings, SHS High Speed Gear set (13:1), Labour.  - £320.00

Tier 3 - Guarder AEG Spring, SHS 14.5 Steel Teeth Piston, Airlab Sorbothane Pad, Maxx Model CNC Alumuminium Air Nozzle, Maxx Model CNC Aluminium Double O-Ring Ball Bearing Piston Head, Prometheus EG 6.03 Steel Inner Barrel, SHS Double O-Ring AEG Cylinder Head, SHS Gearbox Shim Set, Maple Leaf Omega Nub, SHS High Speed Gear Set (13:1) (short Stroked), EZO Japanese Premium Stainless Steel Bearings, Warhead Industries - Brushless Motor (High Speed), Maple Leaf MR. Hop-Up Bucking, Maxx Model CNC Hardened Stainless Steel Cylinder, Labour. - £440.00

Due to it's electronic trigger, this replica will not accept an aftermarket mosfet.

Complete Cerakote Finish

Cerakote is an incredibly hard wearing Ceramic paint coating that is baked on for unrivalled strength and durability. Cerakote increases the value of your replica, personalises it and improves service life.

Cerakote is available in a wide range of colours which can be found here under the H-Series Tab https://bit.ly/2Xk0pBd

Block Colours – 1 Colour Per Item, Please email us which parts you would like which colour, for example, upper receiver (Black), lower receiver (Dark Earth), Stock (Black), Pistol Grip (Dark Earth), Barrel (Black) etc.

Multi-Colours / Patterns – 2 or more colours per item, or a camouflage pattern, Please email us which parts you would like which colours or patterns, for example, upper receiver (Multicam), lower receiver (Multicam), Stock (Black), Pistol Grip (Dark Earth), Barrel (Black) etc. You can select single block colours as well as multiples.

Please allow 14 working days or more for your items to arrive when selecting Cerakote, naturally more complex patterns will take longer. Should you wish to supply further details or images of what you want email info@davescustomairsoft.co.uk wherever possible we will try to accommodate your request.

Features

• M-Lok Rail System
• Wired To Mini Tamiya In The Top Cover
• M4 CTR Stock (no wobble)
• Magpul Style Pistol Grip
• Enhanced Safety Lever
• De-Cocking Function
• Electronic Trigger Unit
• 9mm Bushings & 9mm Bearings
• All Steel Receiver,
• Steel Rear Sling Point
• Railed Gas Tube
• Steel AK Side Scope Bracket
• Quick Release Spring
• Aluminium Nozzle
• 2 x Magazines Included 1 x High 1 x Mid
• 340mm Long 6.02mm Inner Barrel
• Adjustable Metal Hop Unit
• 800mm Long (Stock Closed)
• 880mm Long (Stock Extended)
• Incredible Quality and Performance at a very low price point.